1.基面清理。
1. cleaning the base.
2.批益胶泥、粘贴网格布。
The 2. batch of adhesive paste, paste grid cloth.
3.弹线分格，贴泡沫胶带，泡沫胶带选择宽度1.5cm，厚度0.3cm左右。
3. the elastic line is divided into two sections, the foam tape is attached, the width of the foam adhesive tape is 1.5cm, and the thickness is about 0.3cm.
4.批刮第一道腻子，与胶带平齐，待腻子干后，撕去胶带。
The 4. batch scrapes the first putty, flush with the tape. After the putty is dried, tear off the adhesive tape.
5.在第一道腻子的基础上批第二道腻子，把缝批平，接着用直径1.5cm左右的PVC管沿着线槽拉出U型分割槽。
5. Batch the second putty on the basis of the first putty, smooth the seam, and then pull out the U-shaped slot along the slot with a PVC pipe about 1.5 cm in diameter.
6.待腻子保养干透后，对U型槽修边打磨，上一道封闭底漆
6. after the putty is thoroughly dried, the U groove is trimmed and a closed primer is applied.
7.封闭底漆干透后，画黑色或其他颜色的分格线专用漆。
7. after drying the closed primer, draw black or other special color line.
8.将分格线用美纹纸保护好后，上有色底漆。
8. protect the dividing line with beautiful paper, and then use the colored primer.
9.有色底漆干透后，喷中涂主材2遍，及时撕去美纹纸
9. after drying the colored primer, spray the main material 2 times, and tear the beautiful paper in time.
10.罩专用面漆。
10. cover special finish.