定期检查模具的水路是否通畅，并对所有的紧固螺丝进行紧固;再有就是模具使用时要保持正常温度不能忽冷忽热，在常温下工作可延长使用寿命;接着，定期清洗流水槽模具的异物胶丝、异物、油污等，模具加工过程中会分解出低分子化合物腐蚀模具型腔，使得光亮的型腔表面逐渐变得黯淡无光，然后定期检测流水槽模具质量问题，不可以进行人为的破坏。
Regularly check whether the waterway of the die is smooth and tighten all the fastening screw; then keep the normal temperature when the die is used, and work at room temperature can prolong the service life; then, regularly clean the foreign material, rubber filament, foreign matter, oil stain of the flume die, etc., which will decompose in the process of die processing. Low molecule compounds corrode the mould cavity, making the bright surface of the cavity gradually dim and dull, and then periodically inspect the quality of the flume mould, so that it can not be destroyed artificially.