U型槽模具材料使用与分析是用钢板焊接建造的。钢模具具有坚固耐用的特点,而且同其他材料相比,他具有节省钢材,成本更低等优点。由于U型槽都是一些水泥制品，其压力大重量大,所以在选用的时候钢板厚度需要注意,U型槽钢模具的尺寸规格有经常使用的几种,同时这种U型槽尺寸规格小的可以选用薄一点的钢材,超过１米的模具在使用薄的钢材比较不合适,应该选用５ＭＭ厚一点的钢材,选用钢模具生产能够降低一定的生产困难,同时这种钢模具使用寿命很长,可以大大的提升产品的生产效率。
The usage and analysis of U-groove die materials are constructed by welding of steel plates. Steel die has the characteristics of ruggedness and durability, and compared with other materials, it has the advantages of saving steel, lower cost and so on. Because the U-groove is some cement products, its pressure is large and its weight is heavy, so the thickness of steel plate should be noticed when selecting. The size specifications of U-groove steel die have several kinds commonly used. At the same time, the smaller size specifications of U-groove can choose the thinner steel, and the more than 1 meter die is not suitable for using the thinner steel, so we should pay attention to the size specifications of U-groove steel die. Selection of steel with a thickness of 5MM and selection of steel die can reduce certain production difficulties. At the same time, the service life of this steel die is very long, which can greatly improve the production efficiency of the product.