U型槽水渠施工机在开挖槽形基础时主要控制槽形直壁段的深度。 在直壁段开挖时，可以人工成型和开挖U形，满足要求。 在控制底部高度（防止倒转）之前，在倒入垂直模具之前，先倒入段落两端的U形槽模型（使用钢筋根据设计内口尺寸做几件） 坡度），将其两端拉出，并在通道的底部进行底切。 局部修剪过剩的部分可以不做任何处理，在浇筑时直接回填或回填。 然后是立式模具，由于U形截面尺寸不同，当宽度较小时，无法与模板组装。
The U-shaped channel construction machine mainly controls the depth of the channel straight wall section when excavating the channel foundation. During the excavation of straight wall section, the U-shape can be formed and excavated manually to meet the requirements. Before controlling the bottom height (to prevent reverse), before pouring into the vertical mold, first pour in the U-shaped groove model at both ends of the section (use the steel bar to make several pieces according to the design size of the inner opening), pull out both ends, and carry out the undercut at the bottom of the channel. The surplus part of local trimming can be directly backfilled or backfilled during pouring without any treatment. Then there is the vertical mold, because the U-shaped cross-section size is different, when the width is small, it can not be assembled with the template.
最好使用整个模板，即，U形部分是成型的钢模，并且可以组装两侧的直壁部分。 通道，U形段可以用小模板组装。 底部模具化粪池模具 精密铸造 钢纤维 盐水注射机 风电基础模具 nsk轴承经销商 nsk轴承总代理 保定空调移机需要用钢衬加强以进行高程定位。 然后可以将其倒出。 U型槽很小，是由预制工厂生产的，可以直接安装和维修现成的产品。
It is better to use the whole formwork, i.e. the U-shaped part is a formed steel formwork, and the straight wall part on both sides can be assembled. Channel, U-shaped section can be assembled with small template. The bottom mold needs to be reinforced with steel lining for elevation positioning. It can then be poured out. The U-groove is very small, which is produced by the prefabrication factory, and can be directly installed and maintained for ready-made products