1. 根据季节温度的不同，钢模具养护的方法也是不同的。在春夏温度比较高的季节，每天可以脱两次模，因为钢模具和塑料模具不同的是密封性不是太好，所以水分很容易流失，如果是制砖机生产出来的水泥制品，则需要隔断时间洒一次水，以防干燥引起爆裂，钢模具生产出来的制品则不用。秋冬季节温度较低，适合每天脱一次模，如果天气太寒冷，需要把模具放置在室内养护，以防冻裂，损坏模具，影响下次使用。
1. According to the different season temperature, the maintenance method of steel mold is also different. In the season with high temperature in spring and summer, the mold can be removed twice a day, because the difference between steel mold and plastic mold is that the sealing is not very good, so the water is easy to lose. If it is the cement products produced by the brick machine, the water needs to be sprinkled once in the interval time to prevent bursting caused by drying, and the products produced by the steel mold are not used. In autumn and winter, the temperature is low, so it is suitable to take off the mold once a day. If the weather is too cold, the mold needs to be placed in the room for maintenance, so as to prevent frost crack, damage the mold and affect the next use.
2. 脱模后的U型槽模白钢雕塑 小型滚揉机 防火电缆 托辊设备 水刀切割机  铜钟 石雕狮子  校园不锈钢雕塑 扭王块模具具应及时处理干净，将模具内外都清理干净防止水泥凝固后，粘在内侧，减少模具的使用寿命。
2. The U-groove mold after demoulding shall be cleaned in time, and the inside and outside of the mold shall be cleaned to prevent the cement from solidifying and sticking on the inside to reduce the service life of the mold