| U型槽模具/U型槽水泥制品模子养护原理 |
| 添加时间：2021/9/22 16:12:12 浏览次数： |
1. According to the different season temperature, the maintenance method of steel mold is also different. In the season with high temperature in spring and summer, the mold can be removed twice a day, because the difference between steel mold and plastic mold is that the sealing is not very good, so the water is easy to lose. If it is the cement products produced by the brick machine, the water needs to be sprinkled once in the interval time to prevent bursting caused by drying, and the products produced by the steel mold are not used. In autumn and winter, the temperature is low, so it is suitable to take off the mold once a day. If the weather is too cold, the mold needs to be placed in the room for maintenance, so as to prevent frost crack, damage the mold and affect the next use. 2. 脱模后的U型槽模白钢雕塑 小型滚揉机 防火电缆 托辊设备 水刀切割机 铜钟 石雕狮子 校园不锈钢雕塑 扭王块模具具应及时处理干净，将模具内外都清理干净防止水泥凝固后，粘在内侧，减少模具的使用寿命。 2. The U-groove mold after demoulding shall be cleaned in time, and the inside and outside of the mold shall be cleaned to prevent the cement from solidifying and sticking on the inside to reduce the service life of the mold |
| 上一页 U型槽专门设计凹槽接口明沟板 |
| 下一页 U型槽水渠施工机在开挖槽形基础时主要控制槽形直壁段的深度 |
Copyright © 技术支持：遨游网络